Filter
Top Products
3
35GFK-0827 Chapter 3 Configuration
Constant Window Sweep Mode
To change the Sweep Mode, move the cursor to the Sweep Mode field and press the Ta b
key until the desired mode is displayed. Below is the detail screen (page 2) of a
redundant CPU configured for CNST WND (constant window) sweep mode.
When a Series 90-70 redundant CPU is configured for CNST WND (constant window)
mode, the window value will automatically be set to 10 msec.
Constant Sweep Mode
Below is the detail screen (page 2) of a redundant CPU configured for CNST SWP
(constant sweep) mode.
When a Series 90-70 redundant CPU is configured for CNST SWP (constant sweep)
mode, its Sweep Timer value will automatically be set to 100 msec.
The screen shown below is the detail screen (page 3) of a redundant CPU module. This
screen will not appear for non-redundant CPU modules, or when the redundant CPU is