Filter
Top Products
7. For Thin NAS Volumes: in the Reserved Space field, type the size of the storage that is statically
allocated to the NAS volume and select the units as megabytes (MB), gigabytes (GB), or terabytes
(TB).
NOTE: The reserved space must be smaller than the configured size of the NAS volume.
8. Click OK.
Enabling or Disabling a NAS Volume Used Space Alert
You can enable an alert that is triggered when a specified percentage of the NAS volume space has been
used.
1. Click the NAS Volumes tab on the left.
2. Click the All NAS Volumes tab on the top.
3. In the All NAS Volumes pane, click in the row of the volume you want to modify.
4. Click Modify NAS Volume Space.
The Modify NAS Volume Space dialog box appears.
5. Enable or disable a NAS volume used space alert:
– To enable a NAS volume used space alert, select the Alert when used space is over check box.
– To disable a NAS volume used space alert, clear the Alert when used space is over check box.
6. If a NAS volume used space alert is enabled, in the Over X % of NAS Volume Size field, type a number
(from 0 to 100) to specify the percentage of used NAS volume space that triggers an alert.
7. Click OK.
Enabling or Disabling a NAS Volume Unused Space Alert
You can enable an alert that is triggered when the remaining unused NAS volume space is below a
specified size. If a client application requires a certain amount of storage space, you might want to enable
an unused space alert to ensure that the application always has the required storage space.
1. Click the NAS Volumes tab on the left.
2. Click the All NAS Volumes tab on the top.
3. In the All NAS Volumes pane, click in the row of the volume you want to modify.
4. Click Modify NAS Volume Space.
The Modify NAS Volume Space dialog box appears.
5. Enable or disable a NAS volume used space alert:
– To enable a NAS volume used space alert, select the Alert when used space is below check box.
– To disable a NAS volume used space alert, clear the Alert when used space is below check box.
6. If a NAS volume used space alert is enabled, in the Below X % of NAS Volume Size field, type a
number (from 0 to 100) to specify the percentage of used NAS volume space that triggers an alert.
7. Click OK.
Enabling or Disabling a NAS Volume Snapshot Space Consumption Threshold Alert
You can enable an alert that is triggered when a specified percentage of the NAS volume space has been
used for snapshots.
1. Click the NAS Volumes tab on the left.
2. Click the All NAS Volumes tab on the top.
3. In the All NAS Volumes pane, click in the row of the volume you want to modify.
4. Click Modify NAS Volume Space.
The Modify NAS Volume Space dialog box appears.
95