Filter
Top Products
75
EN
(English)
Windows 7/Vista Firmware Upgrade Driver Installation (5)
12. After the driver is installed, enter “Yes” or “Y” in the command window as shown in below. The new firmware is
downloaded to the instrument, and the instrument restarts and begins a Self-Check.
13. The instrument is recognized by the 3M Molecular Detection Software and the instrument icon appears in the status bar.
Hovering over the instrument icon shows the new firmware revision number.
14. If the instrument is not recognized, an error has occurred. To recover, switch the instrument off and then back on and
restart the upgrade process.
UpgradeIt Command Window