Filter
Top Products
38
EN
(English)
13. If you are using a Matrix Control, link the sample to the Matrix Control by assigning the same Sample ID to both the
sample and the Matrix Control. This association causes the sample result to be dependent on the Matrix Control result.
You can also link a single MC to multiple sample wells; however, all wells must have the same Sample ID. Individual
wells do have different codes (e.g., A1, A2) that can be used to track the samples. To further differentiate the wells, enter
a comment for each. The comment is shown in the Run Report and results export file. Refer to section in this manual on
viewing run results.
14. Select the Retest option in the Well Details pane if the well contains a retest of a previous sample. Click the add icon
to select the run and the well that is being retested.
15. Select the run and well that is being retested when the Retest window appears.
16. Click the OK button.
17. You can also use the Well Details pane to enter a comment into the Comment: field that is relevant to the well definition.
18. You can display the well details by hovering the cursor over a well in the Setup (Grid) pane. All well detail information
with the exception of Retest is shown.