Renesas R5S72647 Doll User Manual


  Open as PDF
of 2152
 
Section 1 Overview
R01UH0134EJ0400 Rev. 4.00 Page 3 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Items Specification
Floating-point unit
Floating-point co-processor included
Supports single-precision (32-bit) and double-precision (64-bit)
Supports data type and exceptions that conforms to IEEE754 standard
Two rounding modes: Round to nearest and round to zero
Two denormalization modes: Flush to zero
Floating-point registers
Sixteen 32-bit floating-point registers (single-precision 16 words
or double-precision 8 words)
Two 32-bit floating-point system registers
Supports FMAC (multiplication and accumulation) instructions
Supports FDIV (division) and FSQRT (square root) instructions
Supports FLDI0/FLDI1 (load constant 0/1) instructions
Instruction execution time
Latency (FMAC/FADD/FSUB/FMUL): Three cycles (single-
precision), eight cycles (double-precision)
Pitch (FMAC/FADD/FSUB/FMUL): One cycle (single-precision), six
cycles (double-precision)
Note: FMAC only supports single-precision
Five-stage pipeline
Cache memory
Instruction cache: 8 Kbytes
Operand cache: 8 Kbytes
128-entry/way, 4-way set associative, 16-byte block length
configuration each for the instruction cache and operand cache
Write-back, write-through, LRU replacement algorithm
Way lock function available (only for operand cache); ways 2 and 3 can
be locked
Interrupt controller
Seventeen external interrupt pins (NMI, IRQ7 to IRQ0, and PINT7 to
PINT0)
On-chip peripheral interrupts: Priority level set for each module
16 priority levels available
Register bank enabling fast register saving and restoring in interrupt
processing