Renesas R5S72647 Doll User Manual


  Open as PDF
of 2152
 
Section 26 USB 2.0 Host/Function Module
R01UH0134EJ0400 Rev. 4.00 Page 1373 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
(2) D0FIFOSEL, D1FIFOSEL
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Bit:
Initial value:
R/W:
0000000000000000
R/W R/W* R/W R/W R/W R/W R R/W R R R R R/W R/W R/W R/W
RCNT REW DCLRM DREQE MBW[1:0]
BIG
END
CURPIPE[3:0]
Bit Bit Name
Initial
Value R/W Description
15 RCNT 0 R/W Read Count Mode
Specifies the read mode for the value in the DTLN
bits in DnFIFOCTR.
0: The DTLN bit is cleared when all of the receive
data has been read from the DnFIFO.
(In double buffer mode, the DTLN bit value is
cleared when all the data has been read from a
single plane.)
1: The DTLN bit is decremented when the receive
data is read from the DnFIFO.
When accessing DnFIFO with the BFRE bit set to 1,
set this bit to 0.
14 REW 0 R/W* Buffer Pointer Rewind
Specifies whether or not to rewind the buffer pointer.
0: The buffer pointer is not rewound.
1: The buffer pointer is rewound.
When the selected pipe is in the receiving direction,
setting this bit to 1 while the FIFO buffer is being
read allows re-reading the FIFO buffer from the first
data (in double buffer mode, re-reading the currently-
read FIFO buffer plane from the first data is allowed).
Do not set REW to 1 simultaneously with modifying
the CURPIPE bits. Before setting REW to 1, be sure
to check that FRDY is 1.
To re-write to the FIFO buffer again from the first
data for the pipe in the transmitting direction, use the
BCLR bit.