Renesas R5S72647 Doll User Manual


  Open as PDF
of 2152
 
Section 23 CD-ROM Decoder
R01UH0134EJ0400 Rev. 4.00 Page 1237 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit Name
Initial
Value R/W Description
3, 2 BUFEND1
[1:0]
10 R/W These bits select whether to change the order of 16-bit
units of data transferred from the serial sound interface
or suppress the stream data. In the serial sound
interface, either “padding mode” or “non-padding mode”
is selectable. In non-padding mode, each 32 bits of data
transferred from the serial sound interface are CD-ROM
data. Since the CD-ROM decoder has two 16-bit input
data registers, the order of the 16-bit data can be
swapped within the 32 bits. On the other hand, in
padding mode each 32 bits of data transferred from the
serial sound interface includes padding. Since the
padding is without meaning, it should be kept out of the
input stream to the decoder. This suppression can be
specified by the setting of this register.
The CD-ROM decoder handles data as a stream of 16-
bit data, and this register controls which 16-bit portion of
each 32 bits of data transferred from the serial sound
interface should be input second.
00: The 16 bits of stream data that would otherwise be
processed second is discarded.
01: The higher-order 16 bits of each 32 bits of data
received from the serial sound interface are placed
second in the stream to the decoder.
10: The higher-order 16 bits of each 32 bits of data
received from the serial sound interface are placed
second in the stream to the decoder.
11: Setting prohibited
1, 0 All 0 R/W Reserved
These bits are always read as 0. The write value should
always be 0.