Renesas R5S72623 Doll User Manual


  Open as PDF
of 2152
 
Section 20 Controller Area Network
Page 1038 of 2108 R01UH0134EJ0400 Rev. 4.00
Sep 24, 2014
SH7262 Group, SH7264 Group
(8) Unread Message Status Register (UMSR)
This register is a 32-bit read/conditionally write register and it records the mailboxes whose
contents have not been accessed by the CPU prior to a new message being received. If the CPU
has not cleared the corresponding bit in the RXPR or RFPR when a new message for that mailbox
is received, the corresponding UMSR bit is set to '1'. This bit may be cleared by writing a '1' to the
corresponding bit location in the UMSR. Writing a '0' has no effect.
If a mailbox is configured as transmit box, the corresponding UMSR will not be set.
UMSR1
1514131211109876543210Bit:
Initial value:
R/W:
0000000000000000
R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W*
UMSR1[15:0]
Note: * Only when writing a '1' to clear.
Bit 15 to 0 — Indicate that an unread received message has been overwritten or overrun condition
has occurred for Mailboxes 31 to 16.
Bit[15:0]: UMSR1 Description
0 [Clearing Condition] Writing '1' (initial value)
1 Unread received message is overwritten by a new message or overrun
condition
[Setting Condition]
When a new message is received before RXPR or RFPR is cleared
UMSR0
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0Bit:
Initial value:
R/W:
0000000000000000
R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W* R/W*
UMSR0[15:0]
Note: * Only when writing a '1' to clear.
Bit 15 to 0 — Indicate that an unread received message has been overwritten or overrun condition
has occurred for Mailboxes 15 to 0.