Filter
Top Products
AdministrativeTasks
600716 Rev A Operating Tasks 2-15
Operaitng Tasks
Step 3. Verify that the DataClass group is defined by using
the
fsclassinfo command.
Step 4. If the DataClass group is not defined, see “All GUI
class operations are run from ADMIN-> Define
Class ->Create Groups or with the fsaddclass
command.” on page 2-5.
Step 5. Run the fsaddrelation command and specify
the DataClass group and directory to be
associated.
Step 6. After adding a relation to a directory, the directory’s
file system is dumped so that the parent directory of
the relation point is present in the dump file. If
several relations are added to the file system, the file
system dump is performed after all the relations are
made.
Note
The fsclassinfo command displays
information for all DataClass groups.
% fsaddrelation production -c england
Note
The entire path name need not be entered. The
directory path is resolved using the current
working directory. The directory notation, “.”
(current directory) and “.” (previous directory), can
be used.
% fsdump -f /arch1/site1_production.dumpfile /site1/production