Filter
Top Products
Administrative Tasks
1-48 System Tasks 600716 Rev A
The UNIX device drivers provide the means to reconfigure
devices for the standard peripherals (disks and system console).
To reconfigure these components, refer to the applicable
platform manual.
Edit Devices with
fsconfig Command
After installation, the system administrator can add or remove
devices from the configured storage system.
The
fsconfig command provides hardware component
configuration. By specifying the proper options and the
accompanying values, hardware components can be added,
modified, or deleted from the system to reflect the actual
physical configuration.
The component identifier is a required value to add, modify, or
delete hardware. When adding a new drive or subsystem
component, the component identifier, component type, and
component alias are required values. The component identifier
cannot be modified. When deleting a subsystem, the drives
must be deleted before the subsystem can be deleted.
Note
The fsconfig command does not allow duplicate device
pathnames in the database.
For more information on the
fsconfig command, refer to
the Command Reference book.