Filter
Top Products
Administrative Tasks
1-34 System Tasks 600716 Rev A
STARVATION_PERCENT 50 Percent of
MAX_TAPE_TO_TAPE_ALLOC_TI
ME variable in which resources will
be obtained and not released until
all resources have been secured or
the time limit has been exceeded.
(Valid range is 1 through 100.)
FS_NICE_VALUE n If enabled, the FileServ process and
database resident process runs with
this n value. Refer to set priority (2)
for the value range of the system.
To enable, enter a value.
To disable, set the value to “0.”
FS_VS_QUEUE_XXX
_THRESHOLD
variable Storage request threshold value
when surpassed, resource requests
are queued in the FileServ system
instead of the VolServ system. The
Value is 3x the number of drives
located in the system. For each
media type, there is a separate entry
required, e.g.,
FS_VS_QUEUE_D2S_THRESHOLD.If
the value is changed, it is
recommended that the sum of all
FS_VS_QUEUE_xxx_THRES-
HOLD values not exceed 100.
FS_THRESHOLD_INC_NUM 5 Threshold increment number
variable. The value for the drive
failure level when an access to a
drive fails.
FS_THRESHOLD_DEC_NUM 1 Threshold decrement number
variable. The value for the drive
failure level when an access to a
drive is successful.
Parameter Default Definition