Filter
Top Products
AdministrativeTasks
600716 Rev A Operating Tasks 2-5
Operaitng Tasks
To create a DataClass group, follow the steps below.
Step 1. To verify the parameter settings before attempting
any modification, use the
fsclassinfo command
to view the DataClass group parameters.
Step 2. Run the
fsaddclass command and specify a
DataClass group name.
Step 3. Use other appropriate options, as needed. For option
information, refer to the Command Reference book.
Modify Group with
fsmodclass Command
The fsmodclass command modifies DataClass group
parameters.
Note
All GUI class operations are run from ADMIN-> Define Class
->Create Groups or with the fsaddclass command.
Tip
A DataClass group must be defined before directories can be
associated with it.
% fsaddclass prodclass
Note
For more information on the fsmodclass command, refer to
the Command Reference book.