Filter
Top Products
Administrative Tasks
1-32 System Tasks 600716 Rev A
(continued) The FS_CALLOUT_SLEEP_INT and
MAX_DMON_SUSP_ERRORS
parameterscanbetuned,if
recurring failures of multiple copies
of files are noted in the system logs.
This situation can occur in a backup
environment where the primary and
backup copies of large files are both
stored at the same time by issuing
the fspolicy command. The
default can expire on the second
copy of a large file while the first
copy is written to media.
Note: Run fspolicy -w to rebuild
candidate files.
For additional help in tuning these
parameters, call ADIC technical
support.
CONNECT_SLEEP_TIME 1 Time to wait (in seconds) before the
next retry if the IPC Connect request
fails.
CONNECT_RETRIES 120 Number of retries on IPC connection
failure. This is set by the factory and
is changed only by technical support
personnel.
MAX_READS 100 Number of retries on IPC receive
failure. Set the MAX_READS and
MAX_WRITES parameters to the
same number. This is set by the
factory and can be changed only by
technical support personnel.
Parameter Default Definition