Filter
Top Products
Administrative Tasks
1-6 System Tasks 600716 Rev A
• F0_D2S_MIGRATE
• F0_D2S_REMOVE
Register the
Configuration
Before FileServ can operate properly, the physical
configuration of the system must be defined within FileServ.
This procedure is accomplished during or after FileServ
installation.
After installation, the system administrator is responsible for
associating all the drive devices configured in VolServ to
FileServ.
The
fsconfig command provides hardware component
configuration.
Define
DataClass
Groups
To use FileServ to either migrate or archive data, directories in
various file systems must be associated with sets of parameters
that govern data migration characteristics. The migration
parameter set is known as a DataClass group.
A DataClass group is created and defined through the
fsaddclass command or Define Classes screen.
The DataClass parameters control the following:
• Allocation of media.
• Number of copies of file data that are stored.
• Application of the data storage.
Note
For more information on the fsconfig command, refer to
the Command Reference book.