Filter
Top Products
Teledyne API Model 200AU NO
X
Analyzer Instruction Manual, 02293, Rev. F
7-2
Table 7-1: Types of Zero/Span Check and Calibration
Section Type of Cal or Check Description
7.1 Manual Z/S Check or Calibration
through the sample port
This calibration option uses calibration gas
coming in through the sample port. Zero/Span
valves do not operate.
7.2 Manual Z/S Check or Calibration with
Z/S Valves Option.
How to operate Zero/Span Valves Option. Can be
used to check or adjust calibration.
7.3 Automatic Z/S Check with Z/S Valves Operates Z/S valves once per day to check the
calibration.
7.4 Dynamic Z/S Calibration with Z/S
Valves
Operates Z/S valves once per day and adjusts
calibration.
7.5 Use of Z/S Valves with Remote
Contact Closure
Operates Z/S valves with rear panel contact
closures. Without valves, can be used to switch
instrument into zero or span cal mode. Used for
either checking or adjusting zero/span.
7.6 EPA Protocol Calibration Covers methods to be used if data is for EPA
equivalency monitoring.
7.7 Special Calibration Requirements for
Independent Ranges or AutoRanging
Covers special requirements if using Independent
Range or AutoRange
7.8 Calibration Quality Information on how to determine if the calibration
performed will result in optimum instrument
performance.
7.9 References Contains a list of references on quality control
and calibration.