Filter
Top Products
Teledyne API Model 200AU NO
X
Analyzer Instruction Manual, 02293, Rev. F
5-28
5.5.2 Command Summary
The information contained in the rest of this section covers commonly used commands that are
required to operate the instrument from a remote terminal. If you are going to be writing
computer programs to communicate with the M200AU (i.e. operating the port in COMPUTER
MODE) we suggest that you order a supplementary manual "The RS-232 Interface", Teledyne
API part number 01350. This manual describes additional features of the port.
The Teledyne API RS-232 interface protocol has a multidrop capability. This is why an optional
ID number is permitted for all commands. If you don’t include the ID number in the command,
all of the instruments connected to the RS-232 interface will respond. If you include the ID
number in the command, only the instrument whose ID number matches will execute the
command.