Filter
Top Products
PathBuilder S24x, 26x, and 27x Switch Hardware Installation 3-15
Installing SIMMs
SIMM Location Figure 3-5 shows the location of the Single In-line Memory Module (SIMM) slots on
the PathBuilder S24x, 26x, and 27x switch motherboard.
Figure 3-5. Installing SIMMs
Installing a SIMM Perform these steps to install the SIMM:
Removing a SIMM When removing a SIMM, gently disengage locking tabs and lift out the SIMM.
Insert SIMM into socket at a slight angle.
Data Compression SIMM
Optional Flash SIMM
DRAM
Processor
Slots
CMEM SIMM Slot
Global DRAM
SIMM Slot
Locking Tabs
Motherboard
CMEM
Data Compression
Optional FLASH
FLASH
SIMMs
Step Action
1 Insert the SIMM at a slight angle as shown in Figure 3-5.
2 Snap the SIMM into the vertical position.
3 Be sure it locks in place with the locking tabs in a vertical position.