Filter
Top Products
Channelized Data 5-7
Configuring Channelized Data
T1 Port Parameters
Overview This section describes the T1 port parameters in detail.
Configuration
Guidelines
Configure a T1 Port before configuring a Virtual Port Mapping Record, which maps
a logical timeslot channel (a virtual port) to that port.
Port Record
Parameters
The following parameters are available from the T1 port record.
Port Number
Range: 49, 50
Default: NA
Description: Specifies the number of the port you are configuring and serves as
the entry number for the port you are about to configure.
Port Type
Range: Voice, T1, E1
Default: Null
Description: Specifies the type of port you are configuring; the parameter value
you input for port type determines the subsequent parameters that
appear next.
Boot Type: Changes to this parameter require a Node boot to take effect.
Line Framing Type
Range: ESF, SF
Default: ESF
Description: Indicates type of framing the DS1 circuit uses.
• ESF: Extended SuperFrame
• SF: SuperFrame
Line Coding Type
Range: B8ZS, B7ZS, AMI
Default: B8ZS