3Com S24x Crib Toy User Manual


 
3-4 PathBuilder S24x, 26x, and 27x Switch Hardware Installation
Installing the DSU DIM
Installing the DSU DIM
Introduction You can install up to two DSUs for each PathBuilder S24x, 26x, and 27x switch
platform using both Ports 1 and 2.
DSU DIM Example Figure 3-2 shows how to install the DSU DIM.
Figure 3-2. DSU DIM Installation
DSU DIM
It is important that the
square markings on the DIM
are on the same side as the
round markings on the board.
Top of Unit
DTE
DCE
Port 1
Port 2
DTE
DCE