Filter
Top Products
Section 11 Multi-Function Timer Pulse Unit 2
Page 500 of 2108 R01UH0134EJ0400 Rev. 4.00
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit Name
Initial
value R/W Description
2 to 0 4VCOR[2:0] 000 R/W These bits specify the TCIV_4 interrupt skipping count
within the range from 0 to 7.*
For details, see table 11.39.
Note: * When 0 is specified for the interrupt skipping count, no interrupt skipping will be
performed. Before changing the interrupt skipping count, be sure to clear the T3AEN
and T4VEN bits to 0 to clear the skipping counter (TICNT).
Table 11.38 Setting of Interrupt Skipping Count by Bits 3ACOR2 to 3ACOR0
Bit 6 Bit 5 Bit 4
3ACOR2 3ACOR1 3ACOR0 Description
0 0 0 Does not skip TGIA_3 interrupts.
0 0 1 Sets the TGIA_3 interrupt skipping count to 1.
0 1 0 Sets the TGIA_3 interrupt skipping count to 2.
0 1 1 Sets the TGIA_3 interrupt skipping count to 3.
1 0 0 Sets the TGIA_3 interrupt skipping count to 4.
1 0 1 Sets the TGIA_3 interrupt skipping count to 5.
1 1 0 Sets the TGIA_3 interrupt skipping count to 6.
1 1 1 Sets the TGIA_3 interrupt skipping count to 7.
Table 11.39 Setting of Interrupt Skipping Count by Bits 4VCOR2 to 4VCOR0
Bit 2 Bit 1 Bit 0
4VCOR2 4VCOR1 4VCOR0 Description
0 0 0 Does not skip TCIV_4 interrupts.
0 0 1 Sets the TCIV_4 interrupt skipping count to 1.
0 1 0 Sets the TCIV_4 interrupt skipping count to 2.
0 1 1 Sets the TCIV_4 interrupt skipping count to 3.
1 0 0 Sets the TCIV_4 interrupt skipping count to 4.
1 0 1 Sets the TCIV_4 interrupt skipping count to 5.
1 1 0 Sets the TCIV_4 interrupt skipping count to 6.
1 1 1 Sets the TCIV_4 interrupt skipping count to 7.