Renesas R5S72646 Doll User Manual


  Open as PDF
of 2152
 
Section 27 Video Display Controller 3
R01UH0134EJ0400 Rev. 4.00 Page 1547 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Section 27 Video Display Controller 3
27.1 Overview
The video display controller 3 provides the following four functions. Note that the video display
function and video recording function cannot be used together.
1. Video display function: Reduces the size of the input video, buffers the resultant video data in
the memory, and then displays the video on the panel.
2. Video recording function: Stores a specified number of input video fields in on-chip large-
capacity RAM or SDRAM.
3. Function for overlaying graphics images (two planes) on the input video.
4. Function for outputting the control signals for the TFT-LCD panel.
27.2 Features
Table 27.1 Features
Item Function
Operating frequency Video input clock: 27 MHz
Panel clock: 4 MHz to 36 MHz (depends on the panel specifications)
Input video standard 8-bit input conforming to the ITU-R BT.656 standard (27 MHz)
8-bit serial input conforming to the ITU-R BT.601 standard (27 MHz)
Video recording
function
Stores video data in the RGB565 format at a rate of 1/2 field
(NTSC: 30 fps; PAL: 25 fps).
Video quality
adjustment function
Contrast adjustment and brightness adjustment
Video scaling
processing
Vertical: 1/2, 1/3, or 1/4
Horizontal: 2/3, 1/2, 1/3, or 1/4
For the support of PAL, each scaled value can be further multiplied by 6/7.
Graphics images Two planes (layers 1 and 2)
RGB565 progressive format
(R = 5 bits, G = 6 bits, and B = 5 bits; 16 bits in total)
RGB4444 progressive format
( = 4 bits, R = 4 bits, G = 4 bits, and B = 4 bits; 16 bits in total)