Renesas R5S72646 Doll User Manual


  Open as PDF
of 2152
 
Section 28 Sampling Rate Converter
R01UH0134EJ0400 Rev. 4.00 Page 1653 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
28.2.6 Status Register (SRCSTAT)
SRCSTAT is a 16-bit readable/writable register that indicates the number of data units in the input
and output data FIFOs, whether the various interrupt sources have been generated or not, and the
flush processing status.
1514131211109876543210
Bit:
Initial value:
R/W:
00000010
R R R(W)*
1
R R(W)*
1
R/(W)*
1
R/(W)*
1
R/(W)*
1
Note: Only 0 can be written after having read as 1.*1
00000000
RRRRRRRR
OFDN[4:0] IFDN[3:0]
CEF FLF UDF OVF IINT OINT
Bit Bit Name
Initial
Value
R/W Description
15 to 11 OFDN[4:0] All 0 R Output FIFO Data Count
Indicates the number of data units in the output FIFO.
Note: For channel 1, bits 15 and 14 are reserved
and always read as 0. The write value should
always be 0.
10 to 7 IFDN[3:0] All 0 R Input FIFO Data Count
Indicates the number of data units in the input FIFO.
6 0 R Reserved
This bit is always read as 0. The write value should
always be 0.
5 CEF 0 R/(W)*
1
Conversion End Flag
Indicates that all the output data is read after flush
processing is completed.
[Clearing conditions]
When 0 has been written to the CEF bit after
reading CEF = 1.
When 1 has been written to the CL bit in
SRCCTRL.
When 1 has been written to the SRCEN bit in
SRCCTRL while SRCEN is 0.
[Setting condition]
When the number of data units in the output data
FIFO is zero on completion of flush processing.