Renesas R5S72646 Doll User Manual


  Open as PDF
of 2152
 
Section 32 General Purpose I/O Ports
R01UH0134EJ0400 Rev. 4.00 Page 1709 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit Name Initial Value R/W Description
4 PC1MD0 0/1 R/W PC1 Mode
Select the function of the PC1
Boot mode 0
0: Setting prohibited
1: RD (initial value)
Boot mode 1 to 3
0: PC1 (initial value)
1: RD
3 to 1 All 0 R Reserved
These bits are always read as 0. The write
value should always be 0.
0 PC0MD0 0/1 R/W PC0 Mode
Select the function of the PC0
Boot mode 0
0: Setting prohibited
1: CS0 (initial value)
Boot mode 1 to 3
0: PC0 (initial value)
1: CS0
32.2.9 Port C I/O Register 0 (PCIOR0)
PCIOR0 is a 16-bit readable/writable register that is used to set the pins on port C as inputs or
outputs. The PC10IOR to PC0IOR bits correspond to the PC10 to PC0 pins, respectively.
PCIOR0 is enabled when the port C pins are functioning as general-purpose I/O (PC10 to PC0) or
TIOC I/O of multi-function timer pulse unit 2. In other states, PCIOR0 is disabled. If a bit in
PCIOR0 is set to 1, the corresponding pin on port C functions as an output pin. If it is cleared to 0,
the corresponding pin functions as an input pin.
Bits 15 to 11 in PCIOR0, and bits 10 and 9 in PCIOR0 in the SH7262 Group are reserved. These
bits are always read as 0. The write value should always be 0.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0000000000000000
R R R R R R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
----
PC10
IOR
PC9
IOR
PC8
IOR
PC7
IOR
PC6
IOR
PC5
IOR
PC4
IOR
PC3
IOR
PC2
IOR
PC1
IOR
PC0
IOR
-
Bit:
Initial value:
R/W: