Filter
Top Products
9. Image menu
Auto
Detects for film and it starts to avoid deinterlacing artefacts, and it results in a perfect artefact-free display.
Off no detection for fi lm mode.
When film with a banner is projected at the same time, and film mode is auto, the banner will shown possible artefacts as the
software will detect a film.
Image 9-75
Image 9-76
Image 9-77
Image 9-78
9.6 Image files services
Overview
• Files and file manipulations
• Manual Load file
• Delete file
• Delete all custom files
• Rename a file
• Copy a file
• File options
9.6.1 Files and file manipulations
Connecting a new source.
Before using a new source, a correct file has to be installed. The projector’s memory contains a list of files corresponding to the most
used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When
there is a little difference, the file can also be loaded and then edited until the source specs are reached.
VESA standards and video standards are pre-programmed.
R5976986 FLM HD18 15/03/2010
87