Filter
Top Products
3. Physical installation
Image 3-31
5. Place the projector (upside down) under the truss installation and lower the truss until the support bars of the truss are nearby
the rigging clamps mounted on the projector.
Image 3-32
6. Lift up the projector and hook the four rigging clamps over the support bars of the truss.
7. Lock all four rigging clamps.
8. Install a safety chain (S) around both sides of the carrying handle and around the truss.
S
S
Image 3-33
9. Lift up the truss with attached projector to the desired height.
28
R5976986 FLM HD18 15/03/2010