Barco RS976986/08 Crib Toy User Manual


 
9. Image menu
Use the or key to adjust the horizontal size of the image.
When the desired aspect ratio is obtained, press EXIT.
Image 9-60
Image 9-61
9.5 Timings
9.5.1 Source timings
Adjustable items
Horizontal start in pixels : number of pixels between the beginning of the input signal and the start of the video information in
the signal.
Width = Active horizontal pixels : determine the width of the window on the screen. This value is normally given in the source
specications. If not, adjust until full image is displayed (no missing pixels).
Vertical start in lines : number of lines between the start of the input signal and start of the image on the screen.
Height = Active vertical lines : number of horizontal lines determining the height of the projected image. this value is normally
given in the specication of the source. If not, adjust until full image height is displayed (no missing lines).
Total pixels: Total horizontal pixels in the source. If the value is wrong, sampling mistakes (small vertical bars in the projected
image) will be seen in the image.
Total lines: Total vertical lines in the source.
How to start up?
1. Press MENU to activate the menus.
2. Use the or key to select Image and press ENTER.
3. Use the or key to select Timings and press ENTER.
The timings menu will be displayed.
Image 9-62
Image 9-63
Image 9-64
4. To change a setting, use the or key to select and press ENTER.
R5976986 FLM HD18 15/03/2010
83