Filter
Top Products
Section 27 Video Display Controller 3
R01UH0134EJ0400 Rev. 4.00 Page 1635 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
27.8.5 How to Use Control Signal Output to Panel
The control signals described in section 27.6.3, Panel Control Signal Output Function, can be
generated through the register settings shown in table 27.26.
Table 27.26 Registers for Control Signal Output to Panel
Register Name Setting
SYNCNT Specify the polarity and timing (rising or falling edge) of the output
signals.
PANEL_CLKSEL Make the LCD_CLK settings.
SYN_SIZE Specify the panel size.
PANEL_VSYNC_TIM Specify the timing of LCD_VSYNC.
PANEL_HSYNC_TIM Specify the timing of LCD_HSYNC.
DE_SIZE Specify the LCD_DE size.
DE_START Specify the LCD_DE position.
AC_LINE_NUM Specify the LCD_M_DISP toggle position.