Filter
Top Products
Section 19 Serial I/O with FIFO
Page 960 of 2108 R01UH0134EJ0400 Rev. 4.00
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit Name
Initial
Value R/W Description
2
1
0
BRDV2
BRDV1
BRDV0
0
0
0
R/W
R/W
R/W
Baud rate generator’s Division Ratio Setting
Set the frequency division ratio for the output stage of the
baud rate generator.
000: Prescalar output 1/2
001: Prescalar output 1/4
010: Prescalar output 1/8
011: Prescalar output 1/16
100: Prescalar output 1/32
101: Setting prohibited
110: Setting prohibited
111: Setting prohibited
The final frequency division ratio of the baud rate
generator is determined by BRPS BRDV (maximum
1/1024).
19.3.9 Transmit Data Assign Register (SITDAR)
SITDAR specifies the position of the transmit data in a frame (slot number).
Bit:
Initial Value:
R/W:
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
0
0000000000000000
R/W R R R R/W R/W R/W R/W R/W R/W R R R/W R/W R/W R/W
TDLE - - - TDLA3 TDLA2 TDLA1 TDLA0 TDRE TLREP - - TDRA3 TDRA2 TDRA1 TDRA0
Bit Bit Name
Initial
Value R/W Description
15 TDLE 0 R/W Transmit Left-Channel Data Enable
0: Disables left-channel data transmission
1: Enables left-channel data transmission
14 to 12 All 0 R Reserved
These bits are always read as 0. The write value should
always be 0.