Mitsubishi Electronics A1SD75P1-S3/P2-S3/P3/S3 Model Vehicle User Manual


 
7 - 15 7 - 15
MELSOFT
7. SYSTEM CHECKING FROM PERIPHERAL DEVICE
DISPLAY/SETTING SCREE
N
DISPLAY/SETTING DATA
Item Description
Servo status
External I/O
Indicates the states of the signals from external devices connected to the AD75M.
JOG speed Set the speed for JOG operation.
JOG operation
Choose the arrow (
) of the axis for JOG operation and press the mouse's left
button or the space key to start JOG operation.
The arrow is red during operation.
Param. Indicates the motor speeds set to the servo basic parameters (refer to Section 8.2.1)
RPM Indicates the current servomotor speeds.
Max. For. Indicates the servomotor maximum speeds in the forward direction.
Max. Rev. Indicates the servomotor maximum speeds in the reverse direction.
JOG speed limit
Acc.
Dec.
Indicates the JOG speed limit values, JOG speed accel times and JOG speed decel times
set to extended parameters 2 (refer to Section 8.1.4).
Address
Speed
Error
Warning
Indicates the feed addresses, axis speeds, error codes and warning codes of the axes.
"Data clear" button Click this button to clear the maximum forward and reverse speed values.
"Servo end"/"Online"
button
Click the "Servo end" button to end the AD75M test mode and terminate the speed check.
Click the "Online" button to place the AD75M in the test mode and start the speed check.