Mitsubishi Electronics A1SD75P1-S3/P2-S3/P3/S3 Model Vehicle User Manual


 
12 - 6 12 - 6
MELSOFT
12. USEFUL FUNCTIONS
(3) Paste
Used to paste the cut or copied data to the selected range.
Note that paste may not be made if:
The control method is not set to the data of paste destination;
The data of cut or copy destination is different in control method from the data of
paste destination; or
The item cut or copied is different from the item of paste destination.
1) Choose the paste destination (copy destination) of
the data cut (copied).
2) Click the [Edit] [Paste] menu (
).
3) The values in the selected range change to the cut
(copied) data.
(4) Copying and pasting from Microsoft
R
Excel/Word table
Used to copy values entered into the Microsoft
R
Excel/Word table and paste
them to positioning data or start block data of GX Configurator-AP.
[Example of copying Microsoft
R
Excel data and pasting them to positioning data]
1) Choose and copy the Excel table. 2) Choose the setting range in the positioning data
and click the [Edit] [Paste] menu (
).