Filter
Top Products
6.2.10 Operating mode Motion Sequence
Starting the operating mode The operating mode is set and started in the process data channel
with the transmit data (master to slave).
Method dmControl
Bits 0 ... 6
MODE+ACTION
Reference value RefA32 Reference value RefB32
Start sequence 1D
h
Data set number Value 1: Use data set
number
Start individual data set 3D
h
Data set number -
Status information The word "driveStat" provides information on the operating mode.
Bit Name Meaning
13 X_ADD1 1: End of a sequence
14 X_END 0: Operating mode started
1: Operating mode terminated
15 X_ERR 0: No error
1: Error
Terminating the operating mode The operating mode is terminated when the motor is at a standstill and
one of the following conditions is met:
•
Individual data set terminated
•
Individual data set of a sequence terminated (waiting for transition
condition to be fulfilled)
•
Sequence terminated
•
Stop caused by "Halt" or "Quick Stop"
•
Stop caused by an error
LXM32M
6 Operation
Modbus-TCP module
63
0198441113843, V1.01, 01.2012