Filter
Top Products
6.2.9 Operating mode Homing
Starting the operating mode The operating mode is set and started in the process data channel
with the transmit data (master to slave).
Method dmControl
Bits 0 ... 6
MODE+ACTION
Reference value RefA32 Reference value RefB32
Position setting 06
h
- As HMp_setP
Reference movement 26
h
As HMmethod -
Status information The word "driveStat" provides information on the operating mode.
Bit Name Meaning
13 X_ADD1 Reserved
14 X_END 0: Operating mode started
1: Operating mode terminated
15 X_ERR 0: No error
1: Error
Terminating the operating mode The operating mode is terminated when the motor is at a standstill and
one of the following conditions is met:
•
Homing successful
•
Stop caused by "Halt" or "Quick Stop"
•
Stop caused by an error
6 Operation
LXM32M
62
Modbus-TCP module
0198441113843, V1.01, 01.2012