Filter
Top Products
5 Commissioning
5
WARNING
LOSS OF CONTROL
The product is unable to detect an interruption of the network link if
connection monitoring is not active.
•
Verify that connection monitoring is on.
•
The shorter the time for monitoring, the faster the detection of the
interruption.
Failure to follow these instructions can result in death, serious
injury or equipment damage.
WARNING
UNINTENDED OPERATION
•
Do not write values to reserved parameters.
•
Do not write values to parameters unless you fully understand the
function.
•
Run initial tests without coupled loads.
•
Verify the use of the word sequence with fieldbus communication.
•
Do not establish a fieldbus connection unless you have fully
understood the communication principles.
•
Only start the system if there are no persons or obstructions in
the hazardous area.
Failure to follow these instructions can result in death, serious
injury or equipment damage.
5.1
Commissioning the device
For installation in the network, the device must first be properly instal-
led (mechanically and electrically) and commissioned.
▶
Commission the device as per product manual.
LXM32M
5 Commissioning
Modbus-TCP module 37
0198441113843, V1.01, 01.2012