Filter
Top Products
Type of network address assign-
ment
▶
Select the type of network address assignment.
The type of network address assignment is set via the parameter
EthIpMode (iPMd).
Parameter name
HMI menu
HMI name
Description Unit
Minimum value
Factory setting
Maximum value
Data type
R/W
Persistent
Expert
Parameter address
via fieldbus
EthIpMode
ConF → CoM-
ConF → FSu-
iPMd
Type of obtaining IP address
0 / Manual / MAnu : Manual
1 / BOOTP / boot : BOOTP
2 / DHCP / dhcP : DHCP
When selecting DHCP, also set the parame-
ter EthFdrEnable to ON or OFF, depending
on whether or not your DHCP server sup-
ports FDR.
Changed settings become active immedi-
ately.
-
0
2
2
UINT16
UINT16
UINT16
UINT16
R/W
per.
-
CANopen 3044:5
h
Modbus 17418
Profibus 17418
CIP 168.1.5
5.2.1 Manual assignment of the network address
■
EthIpMode has been set to Manual (manu).
▶
Set the network addresses consisting of the IP address and the
subnet mask.
The IP address is set via the parameters
EthIPmodule1 ... EthIPmodule4. The subnet mask is set via
the parameters EthIPmask1 ... EthIPmask4.
LXM32M
5 Commissioning
Modbus-TCP module 39
0198441113843, V1.01, 01.2012