Filter
Top Products
6.2.6 Operating mode Profile Torque
Starting the operating mode The operating mode is set and started in the process data channel
with the transmit data (master to slave).
dmControl
Bits 0 ... 6
MODE+ACTION
Reference value RefA32 Reference value RefB32
24
h
As PTtq_target As RAMP_tq_slope
Status information The word "driveStat" provides information on the operating mode.
Bit Name Meaning
13 X_ADD1 0: Target torque not reached
1: Target torque reached
14 X_END 0: Operating mode started
1: Operating mode terminated
15 X_ERR 0: No error
1: Error
Terminating the operating mode The operating mode is terminated when the motor is at a standstill and
one of the following conditions is met:
•
Stop caused by "Halt" or "Quick Stop"
•
Stop caused by an error
LXM32M
6 Operation
Modbus-TCP module
59
0198441113843, V1.01, 01.2012