Filter
Top Products
DSLAM Connections with remote CPE units 97
Model 3086FR ATM IAD User Guide 8 • 3086FR routed and bridged ATM connections
Model 3086FR (Remote—Client) Configuration Steps (PPPoA Routed)
1. From the command line interface (CLI) via the RS-232 control port,
fi
ip list interfaces
One IP interface was called ip1 with an IP address of 192.168.1.1 Change it to an IP address which is in
the same subnet as the Desktop PC. For example, to 192.168.100.2. The default IP mask is
255.255.255.0.
fi
ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0
Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086FR.
Click on G.SHDSL in the Configuration Menu > Configuration > verify that Terminal Type is Central
and Interface Type is atm. If changed, then click on
Configure.
Click on Action > Select deactivate for Action > Click on the
Action button.
2. On the Menu, go to Configuration, then to WAN Connections
Delete both default WAN services already defined.
Click on
Create a new service in the main window, select PPPoA Routed and click on the Configure button.