Filter
Top Products
Introduction 46
Model 3086FR ATM IAD User Guide 5 • Configuring the DSL and serial ports
Introduction
Configuration of the 3086FR can be broken down into the following steps:
• Configuring the DSL interface (see section “Configuring the DSL interface”)
• Configuring the serial interface (see section “Configuring the serial port” on page 50)
• Configuring the ATM/FR features (see chapter “Configuring FR and ATM features” on page 53)
• Configuring the LMI ( local management interface) (see chapter “Configuring the DSL and serial ports” on
page 45)
Configuration can be done via web browser, or via command line interface (CLI) through local terminal
or
Telnet.
Configuring the DSL interface
Configuring DSL interface using the web browser.
To go to the G.SHDSL attributes page, from the main menu click on the G.SHDSL option, then click on the
configuration option.
Circuit ID
User can enter up to 30 alphanumeric characters for circuit identification
Clear Error Counters
Selecting “Clear” will reset the error counters displayed in the “Status” screen.