Filter
Top Products
DSLAM Connections with remote CPE units 89
Model 3086FR ATM IAD User Guide 8 • 3086FR routed and bridged ATM connections
One IP interface is called ip1 with an IP address of 192.168.1.1
Change the IP address so it is in the same subnet as both PCs. For example, to 192.168.100.3
fi
ip set interface ip1 ipaddress 192.168.100.3 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086FR.
2. On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services
already defined.
Click on Create a new service in the main window, select PPPoA_Bridged and click on the Configure button.
In the Description field, enter the description you wish. In this example, it is called PPPoA Bridged.
–VPI = 0
– VCI = 300
– LLC header mode = off
–HDLC header mode = off
– No authentication
– Leave User name and Password blank.
Click on Apply.
3. Go to G.SHDSL in the Configuration Menu, then the submenu Configuration.
Leave Terminal Type as Central.
Change Interface Type to atm. Click on the Configure button.
In the Action submenu under G.SHDSL, change Action to Deactivate, then click on Action.
Return to Action, select Start and click on Action.
Routed application configurations to a DSLAM
Five routed WAN services are offered, RFC 1483, IPoA, and PPPoA.