Filter
Top Products
Frame Relay Network (FRN) Interworking (FRF.5) 65
Model 3096RC G.SHDSL T-DAC Administrators’ Reference Guide 6 • Configuring FR and ATM features
Channel Level Information:
---------------------------------------------------------------------
|Chn1 |DLCI|Net DLCI|Activate| Tx Pkt G/B | Rx Pkt G/B |Status
|chn1 |100 |0 |enable | 0/0 | 0/0 |active
|chn2 |101 |0 |disable | N/A | N/A |N/A
|chn3 |102 |0 |disable | N/A | N/A |N/A
|chn4 |103 |0 |disable | N/A | N/A |N/A
|chn5 |104 |0 |disable | N/A | N/A |N/A
|chn6 |105 |0 |disable | N/A | N/A |N/A
|chn7 |106 |0 |disable | N/A | N/A |N/A
|chn8 |107 |0 |disable | N/A | N/A |N/A
-------------------------------------------------------------------
Set configuration variables associated with the specified port
Command: frn set port# <variable> <value>
The frn set port# command allows the user to set port level specific variables to their optional values. All vari-
ables described above for the port level configurations are available from the frn set port# command screen.
The following example shows the setting of port #5 MuxMode to mux_many_to_one.
Note
After the first line the “?” was used to determine the possible configuration
options available to the user.
Note
At any point during the typing of the command selecting the “?” will display
the possible options available to the user.
Note
After the first several letters of the command are typed pressing the Tab key
will tell the system to complete the variable or command name.
fi
frn set port5 MuxMode
mux_many_to_one
mux_one_to_one
fi
frn set port5 MuxMode mux_many_to_one
Configuration Management of the Channel Level Variables
The following information can be used to configure the Channel Level information associated with the FRN
connections. The CLI uses the frn directive of the CLI interface for Channel Level configuration.
Note
The frn show port and frn list commands already discussed at the port level
are also useful to gain detailed and overview information about the channels.
Understanding the Channel Level View
The Model 3086FR supports up to 8 individual FRN ports. Each port can support up to 8 channels while set
to the “many to one” multiplexing mode. To access the port level information the user must first define the