Filter
Top Products
DSLAM Connections with remote CPE units 88
Model 3086FR ATM IAD User Guide 8 • 3086FR routed and bridged ATM connections
2. On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services
already defined.
Click on Create a new service in the main window, select PPPoA_Bridged and click on the Configure button.
In the Description field, enter the description you wish. In this example, it is called PPPoA Bridged.
–VPI = 0
– VCI = 300
– LLC header mode = off
–HDLC header mode = off
– No authentication
– Leave User name and Password blank.
Click on Apply.
3. Go to G.SHDSL in the Configuration Menu, then the submenu Configuration.
Change Terminal Type to Remote and Interface Type to atm. Click on the Configure button.
In the Action submenu under G.SHDSL, change Action to Deactivate, then click on Action.
Return to Action, select Start and click on Action.
Model 3086FR (Central)Configuration Steps (PPPoA Bridged)
From the command line interface (CLI) via the RS-232 control port,
fi
ip list interfaces