Filter
Top Products
DSLAM Connections with remote CPE units 113
Model 3086FR ATM IAD User Guide 8 • 3086FR routed and bridged ATM connections
3. Returning to the 3086FR Configuration Menu, click on Configuration, then IP Routes.
Click on “Create new Ip V4 Route.”
– Destination:0.0.0.0
– Gateway:192.168.164.2
– Mask:0.0.0.0
–Cost:1
– Interface:[leave blank]
Click on
OK.
4. Go to G.SHDSL in the Configuration Menu, then the submenu Configuration.
Leave Terminal Type as Remote.
Change Interface Type to hdlc. Click on the
Configure button.
In the Action submenu under G.SHDSL, change Action to Deactivate, then click on
Action.
Return to Action, select Start and click on
Action.