Filter
Top Products
6 • Configuring FR and ATM features Model 3096RC G.SHDSL T-DAC Administrators’ Reference Guide
60 Frame Relay Network (FRN) Interworking (FRF.5)
The screen gives an overview of the FRN connections that are available. Each Port Number in the left column
is a hyperlink that will display the
Port X Configuration
window (where x is the port number selected) (see
figure 20), a more detailed view of the port along with the configuration of the channel level information.
Figure 20. Port X Configuration window
This screen is divided into the following sections:
Port Level Information screen
The
Port Level Configuration
information allows the user to configure Port Level variables (see figure 20). After
configuration changes have been made, use the
Configure Port
button to set those parameters.
Channel Level Information screen
The
Channel Level
configuration section of the screen allows the user to setup and configure the individual
channels associated with the specified port. Note that in
figure 20 only a single channel is available for config-
uration. This is because the port is set to a MuxMode of one to one.