Filter
Top Products
DSLAM Connections with remote CPE units 112
Model 3086FR ATM IAD User Guide 8 • 3086FR routed and bridged ATM connections
Return to Action, select Start and click on Action.
Model 3086FR (Central) Configuration Steps (IPoA Routed)
From the command line interface (CLI) via the RS-232 control port:
fi
ip list interfaces
One IP interface was called ip1 with an IP address of 192.168.1.1 Change the IP address so it is in the same
subnet as both PCs. For example, to 192.168.172.3. The default IP mask is 255.255.255.0.
fi
ip set interface ip1 ipaddress 192.168.172.3 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086FR.
2. On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services
already defined.
Click on Create a new service in the main window, select IPoA_Routed and click on the Configure button.
In the Description field, enter the description you wish. In this example, it is called IPoA Routed.
–VPI:0
– VCI:700
– WAN IP address: 192.168.164.3
Click on
Apply.