Filter
Top Products
A P P E N D I X B
Remotelymanagingyour systemthrough anRS-232serialinterface
77 smarttech.com/kb/170549
Field Possible Values Description
current poweroverride l on
l off
A power override forces the projector to remain
on when the command is received. This
command isn’t persistent and isn’t stored to non-
volatile memory (cleared on power cycle).
When this mode is enabled, the power button on
the remote control and the ECP, if present, must
not turn off the projector.
This command must also be added to the
service menu so the user can disable it from the
OSD.
target poweroverride l = on
l = off
Sets the power override
Unknown command
If an unknown command is received, the projector sends the following response to the user (there is a
space between “invalid” and “cmd”).
>dummycommand 2134
invalid cmd=dummycommand 2134