Filter
Top Products
A P P E N D I X B
Remotelymanagingyour systemthrough anRS-232serialinterface
75 smarttech.com/kb/170549
Command Response Powered off
set colorwheelidx
[target]
colorwheelidx=
[current]
no
get colorwheelidx colorwheelidx=
[current]
no
get failurelog failurelog=[current] yes
get error# error#=[current] yes
set factoryreset [target] factoryreset=[current] yes
set highspeedfan
[target]
highspeedfan=[current] no
get highspeedfan highspeedfan=[current] no
set statereporting
[target]
statereporting=
[current]
yes
get statereporting statereporting=
[current]
yes
get poweroverride poweroverride=
[current]
no
set poweroverride
[target]
poweroverride=
[current]
no
Field definitions
Field Possible Values Description
current displayhour
0 to 20000
Current display hours.
target testpattern
= 1to 4
Set the test pattern to pattern number (1 to 4). If
there’s only one test pattern, call it test pattern 1.
current testpattern l 1: Grid
l 2: Red
l 3: Green
l 4: Blue
l 5: Grey
l 6: Black
Test pattern being displayed. The built-in test
pattern can be changed.
target colorwheelidx
= ???
The ranges must match the OSD ranges.