Filter
Top Products
C H A P T E R 3
Usingyour interactive whiteboardsystem
17 smarttech.com/kb/170549
Setting Use Notes
Projector Name Displays the projector’s name
as set by an administrator
(maximum 12 characters).
You can set the projector’s name using the
remote management features (see Remotely
managing your system through a network
interface on page 45 and Remotely managing
your system through an RS-232 serial
interface on page 53).
Location Displays the projector’s location
as set by an administrator
(maximum 16 characters).
You can set the projector’s location using the
remote management features (see Remotely
managing your system through a network
interface on page 45 and Remotely managing
your system through an RS-232 serial
interface on page 53).
Contact Displays the contact name or
number for projector support as
set by an administrator
(maximum 16 characters).
You can set the contact name or number using
the remote management features (see
Remotely managing your system through a
network interface on page 45 and Remotely
managing your system through an RS-232
serial interface on page 53).
Language menu
Language Selects language preference. Projector menu support is available in English
(default), Chinese (Simplified), Chinese
(Traditional), Czech, Danish, Dutch, Finnish,
French, German, Greek, Italian, Japanese,
Korean, Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal), Russian,
Spanish and Swedish.
Information menu
Lamp Hours Displays the current number of
lamp usage hours from 0 to
4000 hours from when it was
last reset.
Always reset the lamp hours after you replace
a lamp, because lamp service reminders are
based on the current hours of use. See
Resetting the lamp hours on page 29 for
details on the lamp hours reset procedure.
Input Displays the currently displayed
video input source (VGA-1,
VGA-2, HDMI or None).
Resolution Displays the projector’s most
recently detected video source
signal resolution and refresh
rate.
If there is no current video input source signal,
this setting displays the last known source
signal image resolution and refresh rate.