Filter
Top Products
A P P E N D I X A
Remotelymanagingyour systemthrough anetworkinterface
51 smarttech.com/kb/170549
Submenu setting Description
Read-Only Community Sets a password that is required for each SNMP get request to
thedevice.
N OT E
The default for Read-Only Community is public.
Read/Write Community Sets a password that is required for each SNMP set request to the
device.
N OT E
The default for Read/Write Community is private.
TRAP Destination Address Displays or allows you to set the IP address of the network’s SNMP
TRAP manager in values between 0.0.0.0 and 255.255.255.255. The
TRAP destination address is the IP address of the computer
assigned to handle unsolicited data generated by SNMP TRAP
events generated by the projector, such as power state changes,
projector failure modes, a lamp needing to be replaced or other
issues.
E-mail alerts
This menu enables you to enter your preferred address for receiving e-mail alerts and to adjust related
settings.
Submenu setting Description
E-mail Alert Select Enable to turn on or Disable to turn off the e-mail alert
function.
To Displays or allows you to set the e-mail address of the e-mail alert
recipient.
CC Displays or allows you to set the e-mail address of the e-mail alert
“copyto” recipient.
From Displays or allows you to set the e-mail address of the user who
sends the e-mail alert.
Subject Displays or allows you to set the e-mail alert subject.
Outgoing SMTP server Displays or allows you to set the Simple Mail Transfer Protocol
(SMTP) server that you use on your network.
Username Displays or allows you to set the SMTP server user name.
Password Displays or allows you to set the SMTP server password.