Filter
Top Products
I M P O R T A N T I N F O R M A T I O N
iv smarttech.com/kb/170549
Environmental requirements
Before you install your SMARTBoard M600 interactive whiteboard system, review the following
environmental requirements.
Environmental
requirement
Parameter
Operating temperature
l
41°F to 95°F (5°C to 35°C) from 0' to 6000' (0 m to 1800 m)
l
41°F to 86°F (5°C to 30°C) from 6000' to 9800' (1800 m to 3000 m)
Storage temperature
l
-4°F to 122°F (-20°C to 50°C)
Humidity
l
5% to 95% storage relative humidity, non-condensing
5% to 85% operating relative humidity, non-condensing
Water and fluid
resistance
l
Intended for indoor use only. Doesn’t meet any salt-spray or water
ingress requirements.
l
Don’t pour or spray liquids directly onto your interactive whiteboard,
the projector or any of its sub-components.
Dust
l
Intended for use in office and classroom environments. Not for
industrial use where heavy dust and pollutants can cause
malfunctions or impaired operation. Periodic cleaning is required in
areas with heavier dust. See Cleaning the projector on page 24 for
information on cleaning the projector.
Electrostatic discharge
(ESD)
l
EN61000-4-2 severity level 4 for direct and indirect ESD
l
No malfunction or damage up to 8kV (both polarities) with a 330ohm,
150 pF probe (air discharge)
l
Unmated connectors meet no malfunction or damage up to 4kV (both
polarities) for direct (contact) discharge
Cables
l
All SMARTBoardM600i6 interactive whiteboard system cables
should be shielded to prevent potential accidents and degraded video
and audio quality.
Conducted and radiated
emissions
l
EN55022/CISPR 22, Class A