Filter
Top Products
A P P E N D I X B
Remotelymanagingyour systemthrough anRS-232serialinterface
70 smarttech.com/kb/170549
Command Response Powered off
set emergencyalert
[target]
emergencyalert=
[current]
no
get emergencyalert emergencyalert=
[current]
no
get signaldetected signaldetected=
[current]
yes
The response varies depending on the power
mode.
Field definitions
Field Possible values Description
target autosignal l = on
l = off
The ranges must match the OSD settings.
current autosignal l on
l off
The ranges must match the OSD settings.
target lampreminder l = on
l = off
The ranges must match the OSD settings.
current lampreminder l on
l off
The ranges must match the OSD settings.
target highbrightness l = on
l = off
The ranges must match the OSD settings.
current highbrightness l on
l off
The ranges must match the OSD settings.
target autopoweroff l + val
l – val
l = 0to 240
The ranges must match the OSD ranges.
current autopoweroff l + val
l – val
l = 0to 240
The ranges must match the OSD ranges.
target zoom l + val
l – val
l = 0to 30
The ranges must match the OSD ranges.
current zoom l = 0to 30 The ranges must match the OSD ranges.