Renesas SH7262 R5S72620 Doll User Manual


  Open as PDF
of 2152
 
Section 25 NAND Flash Memory Controller
R01UH0134EJ0400 Rev. 4.00 Page 1295 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit Name
Initial
Value R/W Description
17 QTSEL 0 R/W Select Dividing Rates for Flash Clock
Selects the dividing rate of clock FCLK in the flash
memory.
0: Divides a clock (P) provided from the clock pulse
generator by two and uses it as FCLK.
1: Divides a clock (P) provided from the clock pulse
generator by four and uses it as FCLK.
16 to 14 All 0 R Reserved
These bits are always read as 0. The write value should
always be 0.
13, 12 ECCPOS
[1:0]
00 R/W ECC Embedding Position Specification
ECCPOS[2:0] (bits 25, 13, and 12 of this register)
specifies the position to place ECC in the control code
field when 3- or 4-symbol ECC circuit is used
When 4ECCEN = 0 (ECC is eight bytes)
000: Places ECC with offset of 512 bytes in a sector
001: Places ECC with offset of 516 bytes in a sector
010: Places ECC with offset of 520 bytes in a sector
Other than above: Setting prohibited
When 4ECCEN = 1 (ECC is ten bytes)
000: Places ECC with offset of 518 bytes in a sector
001: Places ECC with offset of 517 bytes in a sector
010: Places ECC with offset of 516 bytes in a sector
011: Places ECC with offset of 515 bytes in a sector
100: Places ECC with offset of 514 bytes in a sector
101: Places ECC with offset of 513 bytes in a sector
110: Places ECC with offset of 512 bytes in a sector
111: Setting prohibited